Back to overview

CDL Pre-trip

Discover CDL Pre-trip : 14 flashcards with questions and answers.

Subject
No category / Others
Language of creation
English
14 flashcards No ratings yet 0 views
Add to my sets

Sign in to add this set to your collection. You will return here afterwards.

Cards in this set

Card 1

Question


Answer

Electric Line = ABC
Properly Mounted and Secure at both ends. No Abrasions, Bulges or Cuts. No exposed wires. 

DANIEL’S TIP: Don’t forget “at both ends”. Its really easy to forget to say “No exposed wires.” so really make that line stick so you won’t miss it on the exam.

Card 2

Question


Answer

Air Lines = ABC & No Leaks
Properly Mounted and Secure at both ends. No Abrasions, Bulges or Cuts. Not leaking air.

DANIEL’S TIP: Don’t forget to say “At both ends.” Be sure to point at both the red and blue air line.

Card 3

Question


Answer

Glad Hands = CBB, No Leaks, Dry Rot
Properly Mounted and Secure. Not Cracked, Bent, or Broken. Seals are in good condition, no cracks or signs of dry rotting. Not leaking air.

DANIEL’S TIP: Take an air line off during the test so you can show the examiner the seals.

Card 4

Question


Answer

Apron = CBB 
Properly Mounted and Secure. Not Cracked, Bent, or Broken.

DANIEL’S TIP: The Apron is the front surface of the Trailer that the Fifth Wheel is beneath. Its the part of the trailer that doesn’t have visible cross members and flat with a few holes.

Card 5

Question


Answer

Skid Plate = CBB & Lubed
Properly Mounted and Secure. Not Cracked, Bent, or Broken. Properly lubed.

DANIEL’S TIP: The Skid Plate is the top slippery surface of the Fifth Wheel. It must be properly lubed.

Card 6

Question


Answer

Gap = “I can see No Daylight”
There is no space between the Apron and Skid Plate.

DANIEL’S TIP: The Gap is not an actual item. Its the space between the Apron and the Skid Plate. There should be no daylight between the Apron and Skid Plate.

Card 7

Question


Answer

King Pin = CBB
Properly Mounted and Secure. Not Cracked, Bent, or Broken.

DANIEL’S TIP: Can be easy to miss because you can’t see it. But please don’t miss something so important as the King Pin. Engrave this into your head.

Card 8

Question


Answer

Locking Jaws = CBB & Fully Locked around Kingpin
Properly Mounted and Secure. Not Cracked, Bent, or Broken. Fully locked around the King Pin.

DANIEL’S TIP: On your exam you must bend down and physically check those Locking Jaws, just like you should be doing every day several times. Be sure to say its fully locked around the King Pin.

Card 9

Question


Answer

Platform = CBB
Properly Mounted and Secure. Not Cracked, Bent, or Broken.

DANIEL’S TIP: The Platform is what the Fifth Wheel rests on. It goes Frame, then Platform, then Fifth Wheel (bottom up). The Platform is easy to inspect, feel free to combine it with the Mounting Bolts. But again, I choose not to.

Card 10

Question


Answer

Mounting Bolts = CBB & None Missing
Properly Mounted and Secure. Not Cracked, Bent, or Broken. None missing.

DANIEL’S TIP: Technically, you could combine this with the Platform but I choose not to. Up to you. Be sure to point at the bolts and don’t forget to say none missing.

Card 11

Question


Answer

 Release Arm = CBB & Locked Position
Properly Mounted and Secure. Not Cracked, Bent, or Broken. Is in the fully locked position.

DANIEL’S TIP: The Release Arm is what allows you to disengage the Locking Jaws. The handle, or Arm, must be in the fully locked position. You must say that!

Card 12

Question


Answer

Sliding Fifth Wheel And Locking Pin = CBB & Fully Engaged
Properly Mounted and Secure. Not Cracked, Bent, or Broken. Is in the fully locked position.

The Locking Pins are positioned properly to give clearance between the tractor and landing gear during turns. The Locking Pins are Fully engaged/Locked. There are no loose or missing parts.

Card 13

Question


Answer

Pivot Pin, Safety Pin, and Cotter Pin 

Securely Mounted, Present and not Cracked, Bent or Broken.





Card 14

Question


Answer

Clearance
Make sure that there is the proper space between the tractor mudflap and the trailer landing gear. So that they don’t hit each other when making a turn.

DANIEL’S TIP: Clearance is by far the easiest to forget of everything in the entire test! I kid you not. Please engrave this into your head. You want to check the space between your mudflap and landing gear, so they don’t hit each other on a turn

How to use this set

Read the preview and check whether the content and answers suit your learning goal. You can add the public set to your sets to study it. Your account shows the available actions.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please reload the page.