Learning Mode Overview - EMB190 OM-A , Rev 4 2023-10-05

Select a learning mode that you would like to use to learn your flashcard set.

Learn whole deck

In deck learning, all cards in the deck are taken and learned. If you answered the question right or wrong, the flash card will be marked as asked.

Once you have worked through all the flashcards in this deck, the whole deck will be shuffled and all the flashcards will be queried again.

This goes on as long as you want to learn.





Spaced learn system (Leitner System)

To learn with these methods you must have a user account.

When you start this learning mode for the first time on a flash card set, all cards are in compartment 1. When you have 75% of all cards in compartment 2, compartment 1 and compartment 2 are queried.

If 80% of all cards are in compartment 3, compartment 1, 2 and 3 are queried. If 85% of the cards are in compartment 4, compartment 1, 2, 3 and 4 are queried.

If 90% of all cards are in compartment 5, all cards in all compartments are queried until all cards are in compartment 5.




Learning individual compartments

To learn with these methods you must have a user account.

You can only learn with compartments if you learn with the spaced learning system. With the compartments you can learn the learning cards of each compartment.

This method does not affect the spaced learning system! So if you have a question right, it will not be placed in the next tray.





Learning mode

To learn with these methods you must have a user account.

With this method you can specify a number of cards, which will then be queried as a check.

This means that if the deck contains 50 cards, you can indicate that you want to learn 20 cards from it. The system will then take 20 cards from the deck and ask you for them.