PDX DCEO Qualification Card

For the following types of tap boxes, discuss the safety PPE; whip routing requirements; and busway space requirements for installation: E&I

Electrically safe gloves. Don't route whips on racks.

For the following types of tap boxes, discuss the safety PPE; whip routing requirements; and busway space requirements for installation: Starline

Electrically safe gloves. Don't route whips on racks.

How many KVA per whip on a WMW rack?

15 KVA per primary whip

What alarms would you expect to see if an ATS transfers to Source 2 on an IEM ATSC 1.0 or PDU Cabinet?

Low Current Alarm, Catcher Active Alarm

What are the color codes and power configurations for the following rack types: Corporate

White, 2N or C2N

What are the color codes and power configurations for the following rack types: EBS

Yellow, N+C

What are the color codes and power configurations for the following rack types: EC2

Red, N+C

What are the color codes and power configurations for the following rack types: Network

White, C2N

What are the color codes and power configurations for the following rack types: Production

Green, N or N+C

What do the LEDs on the front panel of the ATSPSU-BBC indicate?

LEDs are used to indicated source availability, which source is currently supplying power to the loads, and indication of a fault.

What is a power shelf?

The power shelf is the part of the WMW rack that houses the ATSPSU’s as well as the BBU’s.

What is a storm rack and what is its purpose?

Storage location for partially built out ToRs to minimize rackdown time.

What is Cloudforge/Facility Inventory and Topology(FIT) and what is it used for?

CloudForge: Build is the consolidated home of Infrastructure data center capacity planning tools.

FIT owns, manages, and vends validated electrical (power) and mechanical (cooling) equipment inventory along with their topology (the connections between equipment) information for AWS owned or operated data centers, globally.

Both tools are used to inventory, manage and plan in regards to our equipment inventory.

What is PDT (GovCloud) and what security requirements must be met to access a PDT area

PDT Access for FTE    1.Submit a ticket to have HR validate that you are a US Citizen: quicklink (vendors/contractors must have their company a statement on file or related in the ticket,    please refer to below).    2.Complete the GovCloud Training: click Export Controls 101 for GovCloud Access    3.Submit a GovCloud Physcial Access Request ticket and attach the HR validation ticket and GovCloud Access training certificate in the Related Items tab.    4.Submit Doors of Durin for FTE ONLY ALL PDT AREAS ACCESS *RESTRICTED* and include access ticket from #3 above in Comments section when submitting.    5.A PDT Area Access Manager can view and approve you request. All tickets above must be viewable by the approver. For Logical Access click here.

What is the difference between V.1.6 and V.2.0 ATS cabinets?

ATS 1.6 requires Arc Flash PPE to install a jumper when bypassing. ATS 2.0 uses a bypass module.

What is the minimum required row width between opposing racks in an aisle?

24 inches

What is the purpose of an ATS

To provide an automated redundant source of power for an electrical component.

What is the purpose of a rack backfeed?

The purpose of a rack backfeed is to provide an alternative power path to the customer.

This is done so the normal path may be taken offline while still maintaining continuity of power to customer load.

What is the SLA to recover a rack from a rack down event?

45 minutes total.

What type of racks do boomerang UPS's power?

Legacy Racks